Vibration Pads (NP / N)

Rounded Corners

Rubber Pads

The Vibro-Acoustics Neo+ (NP) series of vibration pad isolators provides vibration isolation for mechanical and electrical systems and equipment. Available in softer and harder durometer versions, these isolators are most effective when used on stiff supporting structures with mid- to high-frequency vibration sources. Vibro-Acoustics’ Neo+ pads are made with neoprene rubber and are available in multiples of 2” x 2” (50 x 50mm) modules up to and including 18” x 18” (460 x 460mm) and can support loads up to 35,640 lbs (158.53kN). The pads are made of high tensile strength neoprene compound with a thickness of 7/8” (22mm) that helps increase rated deflection and therefore vibration isolation efficiency. Vibro-Acoustics’ pad isolators are also available with load distribution top plates to accommodate equipment with point-load supports. Neoprene grommet washers are available from Vibro-Acoustics to be used where equipment is bolted down to reduce vibration transmission through the bolts. For lower deflection applications where essential goal is to avoid metal to metal or metal to concrete contact, Vibro-Acoustics provides double sided, ribbed N pads.

Typical applications for the vibration isolation pads include indoor equipment with potential for high frequency vibration and no lateral loads. Typical equipment includes boilers, internally isolated air handling units, transformers and high rpm vertical heat pumps.